1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Money Saving Center Scribe

Discussion in 'Other Tools' started by oiler20, Nov 7, 2017.

  1. oiler20

    oiler20 New Member

    Likes Received:
    9
    Trophy Points:
    3
    Just thought I would share a little tip that works well for me, although most off you guys probably already know about it. For a makeshift center scribe, use a drill bit the same thickness as you blade stock. place your blade blank and drill bit on a flat surface, then roll the drill bit so the tip scratches against the soon to be edge of the blade. flip the blade over and repeat (to make sure you didn't mess up on the first side.)
    Hope this helps someone save some cash/time.
    -Thomas
     
    dancom likes this.
  2. Griff

    Griff Member

    Likes Received:
    51
    Trophy Points:
    18
    Yup, and can't emphasize 'Flat Surface' enough with this method! I use it myself and its been much more accurate since getting a granite surface plate ;)
     
  3. FORGE

    FORGE Maker of the Year Best Knife

    Likes Received:
    188
    Trophy Points:
    43
    I have been making these for years PAT. PENDING
    [​IMG]

    [​IMG]
     
    Mythtaken and dancom like this.

Share This Page