1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Etching A Logo Vs A Touchmark

Discussion in 'Making Your Mark' started by CaptainDevlin, Oct 17, 2017.

  1. cuatroXcuatro

    cuatroXcuatro Member

    Likes Received:
    43
    Trophy Points:
    18
    What was the error message? I'm getting this have googled it and so far haven't got past it:
    The tape cassette installed in the machine does not match the type installed...
     
  2. IamSteve-O

    IamSteve-O New Member

    Likes Received:
    13
    Trophy Points:
    3
    The error I was getting was in the bottom right in a window named brother pt-p700 ? And it said...

    The tape cassette installed in the machine does not match the type selected in the application.

    The problem ended up being the 5 holes on the bottom of the cassette that the printer uses to determine what type of tape you have put in. The cassette that didn't work had an extra hole and the printer didn't recognize the cassette. The broken one that didn't work looked like this...
    [​IMG]
    And the one that worked looked like this...
    [​IMG]
    It may be hard to see in the pictures but the second from the left on the bottom row is missing a plug on the one that would not connect. I was able to electrical tape over the hole and make it work for a few prints but then it wouldn't connect again. Might try a dab of epoxy over the top that hole. Hope this helps with your cassette cuatroXcuatro.
     
  3. cuatroXcuatro

    cuatroXcuatro Member

    Likes Received:
    43
    Trophy Points:
    18
    Fantastic I'm going to try your fix, thx!
     

Share This Page